The bioadhesive "Liposam" is an effective product used to enhance the effectiveness of plant protection and nutritional products. It is based on naturally occurring biopolymers that are completely safe for plants. The product is used to treat seeds, bulbs, and tubers. The instructions for using "Liposam" must be strictly followed.
Active ingredient and dosage form
The product contains several natural biopolymers that form a unique composition. It is produced as a concentrated emulsion. Its color can vary from light gray to beige. It is sold in packages ranging from 5 to 280 milliliters for use on small plots and 0.5 to 10 liters for use on farms.
Operating principle and purpose
The bioadhesive has a wide range of complex effects. These include the following:
- improving the characteristics of protective complexes, ensuring close contact between biological preparations and plant surfaces;
- formation of a protective film that does not damage the seed coat and retains moisture in the roots and leaves;
- increasing the effectiveness of biological and chemical preparations;
- protection from wilting, moisture deficiency, sunburn;
- improving the absorption of micro- and macroelements.
The adhesive "Liposam" functions over a wide temperature range. It retains its properties even at temperatures as high as 50 degrees Celsius. Using this substance allows for a 40% reduction in pesticide dosage while maintaining their effectiveness.
The substance stabilizes the product's effects and has a beneficial effect on crop yields. Using "Liposam" helps reduce the cost of comprehensive care.
The product is used to treat seeds, tubers, and bulbs. It can also be used to soak the root systems of seedlings and transplants. It is also suitable for treating plants during the growing season.
Terms of Use
When using the substance, adhere to the recommended dosage. For seed treatment, use 0.15-1.5 liters of the substance per ton. For crop spraying, use 0.15-0.2 liters per hectare.
Take a look Also
To treat the seeds, make a solution of 10 milliliters of the preparation and 1 liter of water. Soak the seeds in the resulting mixture for 1.5-2 hours. They should be planted when they're slightly dry.
For tubers and bulbs, use a solution of 5-10 milliliters of the product per 2-5 liters of water. It is recommended to spray the material using a spray bottle. For soaking seedling roots, use a solution of the same concentration. This solution is sufficient for 5-10 plants. For the roots of seedlings, use a different mixture. For this, use 5-10 milliliters of the product per 5-10 liters of water.
When applying root water, it's recommended to mix "Liposam" with water to retain the solution around the roots and protect them from mechanical damage. Foliar application should be performed every 1-1.5 weeks. This product should be combined with liquid fertilizers, insecticides, and fungicides.
Liposam is used as an aqueous solution. It is recommended to prepare it gradually. To do this, mix the required amount of the substance with water in equal parts to achieve a uniform consistency. Then, gradually add water in small amounts to achieve the desired volume. Stirring the ingredients constantly is recommended.
If Liposam is to be combined with other products, it's important to follow the order in which they are added. Chemical seed dressings should be added first, followed by microelements, and then the Liposam aqueous solution. Once all components are thoroughly mixed, Biocomplex-BTU should be added.
Safety precautions
Liposam is harmless to humans, beneficial insects, and animals. The products obtained from the treated plants do not accumulate toxins. The fruits can be eaten and processed immediately after treatment. Furthermore, the substance has no shelf life.
However, some precautions are still in place. If the product comes into contact with eyes or skin, rinse the affected area with warm water. If using a solution that contains a pesticide in addition to Liposams, chemical safety precautions must be followed. This requires the use of personal protective equipment (PPE), including protective clothing, goggles, gloves, and a respirator.
How and how long to store
Liposam has a shelf life of 3 years from the date of manufacture. The adhesive must be kept in its original, sealed packaging. It should be stored in warehouses with other chemicals. The temperature should be between 0 and 20 degrees Celsius. The product should be stored in a dark, dry place. After the expiration date, Liposam must be discarded.
What to replace it with
The American adhesive "New-film" is also made from natural polymers. However, its composition is slightly different. This product also contains exopolysaccharides, which are produced by microorganisms. It also contains pine resin. There are also other similar products, including "Macho" and "Trend."
Liposam is an effective product that enhances the action of other products—fungicides, insecticides, and herbicides. It can be used to treat seeds, tubers, and bulbs. It is also used for foliar sprays and root irrigation. To ensure the desired results, it is important to strictly follow the instructions for use. Adherence to safety precautions is also crucial.